隔膜阀的安装与维护

隔膜阀的安装与维护

原文: ①隔膜阀安装前应仔细核对管路的运行条件是否与本阀规定的使用范围相符,并应清洗内腔,以防止污物卡阻或损伤密封部件。②橡胶衬里层和橡胶隔膜表面切勿涂刷油脂类物品,以防橡胶溶胀,影响隔膜阀使用寿命。③手轮或传动机构,不允许作起吊用,并严禁碰撞。④手动操作隔膜阀时,不得借助于辅助杠杆,以防扭力过大而损伤驱动部件或密封部位。⑤隔膜阀应存放在干燥通风的室内,严禁堆放,库存隔膜阀的两端通道必须封口,且启闭件应处于微开启状态。隔膜阀的安装与维护。

 

“The diaphragm valve installation and maintenance”是由中国隔膜阀网提供的阀门行业新闻,译文仅供参考。另外,中国 隔膜阀网还提供相关产品搜索: 直通(流)式隔膜阀、 气动隔膜阀、 电动隔膜阀、 手动隔膜阀、 卫生级隔膜阀 等。隔膜阀的安装与维护。

 

译文: (1) the diaphragm valve pipe installation should be checked carefully before the operation condition are consistent with the use of the provisions of this valve, and should clean the inner chamber, in order to prevent dirt jam or damage the sealing parts. (2) the rubber lining layer and the surface of the rubber diaphragm do not besmear brushs oil kind items, in case the rubber swelling, affect the service life of the diaphragm valve. (3) the handwheel or drive mechanism, does not allow for lifting, and collision is forbidden. (4) manual valve diaphragm, not with the aid of auxiliary lever, to prevent excessive torque drive component or sealing parts and injury. (5) the diaphragm valve should be stored in dry and ventilated room, it is strictly prohibited to pile up, inventory diaphragm valve at both ends of the channel must be sealed, and open-close part should be slightly open.隔膜阀的安装与维护。

此条目发表在 隔膜阀技术 分类目录。将固定链接加入收藏夹。

发表评论

电子邮件地址不会被公开。 必填项已被标记为 *

*

您可以使用这些 HTML 标签和属性: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>