行业新闻

原文
Valve Overview Valve is a valve body, the cylinder, a plastic body, piston rod and a combination of corrosion resistance of small parts, cylinder and valve gaskets and seals with separate corrosion resistance to prevent the glue in a plastic state into the cylinder, valve body fixed to the piston rod on the valve, the valve switches to the use of glue on and off the role. Back to the suction valve off adhesive glue used to suction off plastic structure, so stop back to suction off the plastic while instant glue, reducing the remaining glue residue on the needle, so that after dispensing does not produce drawing, Epoxy and so on. Plastic valve body from the anodized aluminum imports, gaskets, seals with the latest round of iron fluoride materials, the plastic body parts are all imported materials resistant to corrosion. For a variety of different mobility and different viscosity liquids and oils (including: silicone, red gum, yellow gum, white latex, Crystal, anaerobic adhesive, silicone, rubber insulation, solder paste, AB glue, UV glue, epoxy, lubricants, silicone oil, butter, paint, alcohol, oil, etc.), has been widely used in electronic products, mobile phone keypad, LED lamps, LCD, electrical switches, appliances, battery package, keyboard and mouse , transformers, golf, coils, cameras, motors, medical equipment, watches, headphones, speakers and other applications.
原文来自：http://www.gemofa.org

是由上海赛泰泵阀有限公司提供的阀门新闻，中文译文仅供参考，以下提供站内导航搜索：

中国隔膜阀网隔膜阀产品隔膜阀知识隔膜阀厂商隔膜阀博客隔膜阀行业新闻

译文：
胶阀是由阀门本体、气缸、出胶本体、活塞杆及耐腐蚀小部件组合而成，气缸和阀体用耐腐蚀性垫片和密封圈分离，阻止胶水在出胶状态下进入气缸，胶阀体内的阀门固定在活塞杆上，利用阀门的开关达到对胶水的开启和关断作用。回吸式胶阀关胶采用回吸关胶结构，使停胶同时瞬间回吸断胶，减少余留针头上的残胶，使点胶后不产生拉丝、滴胶等现象。胶阀本体由进口铝合金阳极氧化处理，垫片、密封圈采用最新铁氟轮材料，出胶本体部分均为耐腐蚀性进口材料。　　适用于各种不同流动性和不同粘度的液体及油类（包括：硅胶、红胶、黄胶、白乳胶、水晶胶、厌氧胶、矽胶、绝缘胶、锡膏、AB胶、UV胶、环氧树脂、润滑油、硅油、黄油、漆、酒精、油类等），目前已广泛应用于电子产品、手机按键、LED灯具、LCD、电器开关、家用电器、电池封装、键盘鼠标、变压器、高尔夫球、线圈、照相机、电机、医疗器材、手表、耳机、喇叭等应用领域。

更多新闻：