当前位置: 首页 行业新闻 隔膜阀安装维护

行业新闻

原文:
隔膜阀的安装维护:1.安装前应仔细核对管路的运行条件是否与本阀规定的适用范围相符,并应清洗内腔,以防污物卡阻或损伤密封部件。2.橡胶衬里层合橡胶隔膜表面切勿涂刷油脂类物品,以防橡胶溶胀,影响阀门使用寿命。3.安装时不得将线索系结在手轮或阀杆上起吊阀门。4.手动操作阀门时,不得借助于辅助杠杠,以防扭力过大而损伤驱动部件或密封部位。5.阀门应存放在干燥通风的室内,严禁堆放,库存阀门的两端通道必须封口,且启闭件应处于微开启状态。

更多隔膜阀产品,请登录 http://www.gemofa.org 中国隔膜阀网 ,我们将竭诚为您服务。隔膜阀安装维护。
以下是参考译文:

译文:
Diaphragm valve installation and maintenance: 1, before installation should check carefully whether the operating conditions of the pipeline provided with the application of this valve line, and the cavity should be cleaned, in order to prevent dirt jamming or damage to seal components. 2 oak Rubber membrane lining the surface of laminated rubber items are not brushing oil, to prevent the rubber swelling, affecting the service life of the valve. 3 installation shall not be binding clues in lifting the hand valve or valve stem. 4 hand The operation of the valve, not by means of auxiliary lever, to prevent excessive torque and damage drive components or sealed parts. 5 the valve should be stored in dry and ventilated room, is strictly prohibited stacking, inventory at both ends of the valve The channel must be sealed, and micro hoist pieces should be in open state.隔膜阀安装维护。

原文标题:“隔膜阀安装维护”

更多隔膜阀新闻:

隔膜阀相关介绍

新型隔膜阀流量翻倍

隔膜阀的使用及其特点